Flex Sensor SEN52
Features and Specifications:
- Operating voltage: 0-5V
- Can operate on LOW voltages
- Power rating : 0.5Watt (continuous), 1 Watt (peak)
- Operating temperature: -45ºC to +80ºC
- Flat Resistance: 25K Ω
- Resistance Tolerance: ±30%
- Bend Resistance Range: 45K to 125K Ohms(depending on bend)
Pinout:
The pin configuration of the flex sensor is shown above. It is a two-terminal device, and the terminals are like p1 & p2. This sensor doesn’t contain any polarized terminal such as diode otherwise capacitor, which means there is no positive & negative terminal. The required voltage of this sensor to activate the sensor ranges from 3.3V -5V DC which can be gained from any type of interfacing.
- Pin P1: This pin is generally connected to the +ve terminal of the power source.
- Pin P2: This pin is generally connected to GND pin of the power source.
Frw 20,000